IA2
bdbJoinUsesInstallCodeKey: Does the Trust Center policy require all nodes to join using an install code?
5.3.6
M
n/a
IA3
bdbPrimaryChannelSet: What is the primary channel set?
5.3.10
M
0x0318c800
IA4
bdbScanDuration: What is the scan duration?
5.3.11
M
5
IA5
bdbSecondaryChannelSet: What is the secondary channel set?
5.3.12
M
0x04e73000
IA6
bdbTCLinkKeyExchangeAttemptsMax: What is the maximum number of attempts a node will try to exchange its Trust Center link key?
5.3.14
M
M
3
IA7
bdbTCLinkKeyExchangeMethod: What is the Trust Center link key exchange method?
5.3.15
M
M
0x00
IA8
bdbTrustCenterNodeJoinTimeout: What is the Trust Center node join timeout?
5.3.16
M
n/a
IA9
bdbTrustCenterRequireKeyExchange: Does the Trust Center’s policy require a node to exchange its initial link key with a new link key generated by the Trust Center?
5.3.17
M
n/a
CC1
Can the product be stimulated to invoke touchlink commissioning only?
O
false
CC2
Can the product be stimulated to invoke network formation only?
O
false
CC3
Can the product be stimulated to invoke network steering only?
O
true
CC4
Can the product be stimulated to invoke finding and binding only?
O
false
CC5
Can the product be stimulated to invoke touchlink commissioning followed by network steering?
O
false
CC6
Can the product be stimulated to invoke network formation followed by network steering?
O
false
CC7
Can the product be stimulated to invoke network steering followed by network formation?
O
false
CC8
Can the product be stimulated to reset before network formation?
O
false
CC9
Can the product be stimulated to automatically form a network upon startup when factory new?
O
false
M1
Can the node disable network steering via local application trigger?
O
false
M2
Can the node store more than one NWK outgoing frame counters?
O
false
M3.0
If supported, give the endpoint identifier of a cluster that has at least one writable attribute.
O
endpoint id or n/a
M3.1
If supported (in M3.0), give the identifier of the cluster that has at least one writable attribute.
O
0x0101(doorlock cluster)
M3.2
If supported (in M3.0), give the attribute identifier of the writable attribute.
O
0x0000 (lock state), data type 0x30, non-default value 0x01, max interval = 0x32, min interval = 0xb4, direction = 0.
M4
Does the stack filter the scan channels based on a prior energy detection scan?
O
yes/no
M5.0
If supported, give the endpoint identifier of a cluster that has at least one reportable attribute.
O
endpoint id or n/a
M5.1
If supported (in M5.0), give the identifier of the cluster that has at least one reportable attribute.
O
cluster id or n/a
M5.2
If supported (in M5.0), give the attribute identifier of the reportable attribute.
O
attribute id or n/a
M6.0
If supported, give the endpoint identifier of an initiator.
O
endpoint id or n/a
M6.1
If supported (in M6.0), give the identifier of the iniatator cluster.
O
cluster id or n/a
M7.0
Give the number of active endpoints as returned by a touchlink scan response or an Active_EP_rsp command frame.
M
number of active endpoints > 0
M7.1
Give the application device identifier for the endpoint under test.
M
application device id
M7.2
Give the application device version for the endpoint under test.
M
application device version
M8.0
Does the node support reception of the Mgmt_NWK_Update_req ZDO command?
O
0 if not supported, 1 if supported
ZLT1
Is the logical device type specified as a ZigBee coordinator?
[R1]/2.5.4.5.1
O.1
false
ZLT1.1
Does the node encompass the role of the Trust Center?
6.1
M
X
X
false
ZLT1.2
Does the node form a centralized security network?
6.1
M
X
X
false
ZLT1.3
Does the node NOT attempt to join another network?
6.1
M
false
ZLT2
Is the logical device type specified as a ZigBee router?
[R1]/2.5.4.5.2
O.1
false
ZLT2.1
Can the router node join another network?
6.1
M
false
ZLT2.2
Does the node form a distributed network?
6.1
X
O
X
false
ZLT3
Is the logical device type specified as a ZigBee end device?
[R1]/2.5.4.5.5
O.1
true
ZLT3.1
Can the end device node join another network?
6.1
M
true
ZLT3.2
Is the end device sleepy?
-
O
true
ZLT4
Can the node switch between ZLT1 and ZLT2 types under application control.
6.1
O.1
false
A node SHALL support one of ZLT1 or ZLT2 or ZLT3 or (ZLT1 and ZLT2, switchable under application control).
NSM1
Can the node join a centralized security network?
6.2
X
M
M
true
NSM2
Can the node join a distributed security network?
6.2
X
M
M
true
LK1
Does the node contain the default global Trust Center link key?
6.3
M
true
LK2
Does the node contain the distributed security global link key?
6.3
M
M
true
LK3
Does the node contain an install code derived preconfigured link key?
6.3
M
M
true
LK4
Does the node contain the touchlink preconfigured link key?
6.3
M
false
UIC1
Does the node support install codes?
6.4
M
true
UIC2
Will the node not be available via retail channels and be professionally installed?
6.4
O.2
false
UIC3
Will the node be available via retail channels?
6.4
O.2
true
UIC4
Is the node configured to only require the use of install codes on joining?
6.4
O
X
false
UIC5
Does the node have a user configuration mechanism that allows switching between a mode in which only networks that require the use of install codes for joining are considered and a mode in which all networks are considered for joining?
6.4
O.3
true
UIC6
Does the node not have a user configuration mechanism that allows switching between a mode in which only networks that require the use of install codes for joining are considered and a mode in which all networks are considered for joining?
6.4
O.3
false
UIC7
Does the node default to requiring potential networks to use of install codes on joining?
6.4
O
X
true
UIC8
Can the node be switched into a mode whereby all networks are considered for joining?
6.4
M
true
UIC9
Can the node join all types of networks?
6.4
M
false
UIC10
Does the Trust Center require the use of install codes for all joining nodes?
6.4
O
false
One of the items marked O.2 SHALL be supported.
One of the items marked O.3 SHALL be supported.
GRC1.1
Does the node support network steering for a node not on a network?
6.5
M
M
true
GRC1.2
Does the node support network steering for a node on a network?
6.5
O
false
GRC2.1
Is the device implemented as having a simple device class (see [R4])?
6.5
O.4
true
GRC2.2
Is the device implemented as having a dynamic device class (see [R4])?
6.5
O.4
false
GRC2.3
Is the device implemented as having a node device class (see [R4])?
6.5
O.4
false
GRC4
Does the device support finding and binding as either an initiator or a target?
6.5
M
O
O
true
GRC4.1
Does the device provide a mechanism to invoke finding and binding on the device itself?
6.5
O
false
GRC5
Does the device support touchlink commissioning as either an initiator or a target or both?
6.5
O
false
GRC5.1
Does the device support touchlink commissioning as an initiator?
6.5
O.5
false
GRC5.2
Does the device support touchlink commissioning as a target?
6.5
O.5
false
GRC6
If touchlink commissioning as an initiator is attempted and is successful does the device not attempt any further commissioning operations?
6.5
M
false
GRC7
If network steering is attempted does the node follow the correct steering procedure dependent on whether the node is joined to a network or not?
6.5
M
true
GRC8
Does the node only form a network if the node is not yet joined to a network?
6.5
M
M
false
GRC9
Can the node form a centralized network?
6.5
M
false
GRC10
Can the node form a distributed network?
6.5
M
false
GRC12
Does the node attempt finding and binding only if it is joined to a network?
6.5
M
true
GRC13
Does the node instigate finding and binding on one or more endpoints implemented on the node?
6.5
O
false
GRC14
Does the node attempt finding and binding as an initiator endpoint if the endpoint supports a type 1 client or type 2 server cluster?
6.5
O.6
false
GRC15
Does the node attempt finding and binding as a target endpoint if the endpoint supports a type 1 server or type 2 client cluster?
6.5
O.6
true
GRC16
Is the node capable of binding to a group during finding and binding?
-
O
false
GRC17
Is the device able to transmit groupcast messages?
-
O
false
One of the items marked O.4 SHALL be supported.
One of the items marked O.5 SHALL be supported.
One of the items marked O.6 SHALL be supported.
MRD1
Can the node process the ZDO Active_EP_req command and respond with the ZDO Active_EP_rsp command?
6.6
M
true
MRD1.1
Can the node process the ZDO Node_Desc_req command and respond with the ZDO Node_Desc_rsp command?
6.6
M
true
MRD2
Can the node process the ZDO Simple_Desc_req command and respond with the ZDO Simple_Desc_rsp command?
6.6
M
true
MRD3
Can the node process the ZDO IEEE_Addr_req command and respond with the ZDO IEEE_Addr_rsp command?
6.6
M
true
MRD4
Can the node process the ZDO NWK_Addr_req command and respond with the ZDO NWK_Addr_rsp command?
6.6
M
true
MRD5
Can the node process the ZDO Match_Desc_req command and respond with the ZDO Match_Desc_rsp command?
6.6
M
true
MRD6
Can the node process the ZDO Mgmt_Bind_req command and respond with the ZDO Mgmt_Bind_rsp command?
6.6
M
true
MRD7
Can the node process the ZDO Mgmt_Lqi_req command and respond with the ZDO Mgmt_Lqi_rsp command?
6.6
M
true
MRD8
Can the node process the ZDO Bind_req command and respond with the ZDO Bind_rsp command?
6.6
M
true
MRD9
Can the node process the ZDO Unbind_req command and respond with the ZDO Unbind_rsp command?
6.6
M
true
MRD10
Can the node process the ZDO Mgmt_Leave_req command and respond with the ZDO Mgmt_Leave_rsp command?
6.6
M
true
MRD11.0
If the node supports finding and binding as an initiator, does it support the identify cluster as a client?
6.6
M
false
MRD11
If the node supports finding and binding as an initiator, can it process at least one identify cluster, identify query response command after broadcasting an identify cluster, identify query command?
6.6
M
false
MRD12
If the node supports finding and binding as an initiator, can it process more than one identify cluster, identify query response command after broadcasting an identify cluster, identify query command?
6.6
O
false
MRD13
If the node supports finding and binding as an initiator, does it implement a binding table whose number of entries is ≥ the sum of cluster instances supported on each device?
6.6
M
false
MRD14
If the node supports finding and binding as an initiator, regardless of the commissioning mechanism, is the binding table consistent such that its contents can be retrieved using the ZDO Mgmt_Bind_req command?
6.6
M
false
MRD16
Does the node have a cluster which is the target of an application transaction?
6.6
O
false
MRD17
Does the node support group addressing and at least 8 memberships in the group table?
6.6
M
false
DRC1
Does the node have at least one attribute that is specified as mandatory and reportable?
6.7
O
true
DRC2
Does the node have a default reporting configuration for every attribute that is specified as mandatory and reportable?
6.7
M
true
DRC3
Does the node automatically send reports to a node that binds with a cluster containing an attribute that is specified as mandatory and reportable?
6.7
M
true
DRC4
If any default reporting configuration is overwritten, is the updated reporting configuration used instead?
6.7
M
true
DRC5
If the maximum reporting interval of an attribute is greater than 0x0000, is a report generated when the time that has elapse since the previous report of the same attribute is equal to the maximum reporting interval for that attribute?
6.7
M
true
DRC6
If the maximum reporting interval of an attribute is equal to 0x0000, is a report generated when the attribute value changes?
6.7
M
true
MDP1
Is the MAC data polling rate dynamic based on the operating state of the node?
6.8
R
true
MDP2
Does the node have at least a fast and a slow MAC data polling rate?
6.8
R
true
MDP3
Does the device poll more frequently than once per 7.5 seconds?
6.8
R
true
MDP4
While waiting for an active response message, does the node poll at its fast rate?
6.8
R
true
MDP5
Is the fast poll rate at least once every 3 seconds?
6.8
R
true
MDP6
While not actively waiting for messages, does the node poll at its slow rate?
6.8
O
true
MDP7
Does the node poll at its fast rate during commissioning?
6.8
R
true
ZPD1
Does the node preserve the value of the bdbNodeIsOnANetwork attribute across resets?
6.9
M
true
UGP1
Does the node support the Green Power proxy basic functionality?
6.10
M
M
O
false
INP1
Does the node support the initialization procedure?
7.1
M
true
INP2
Does the node restore its persistent ZigBee data?
7.1
M
true
INP3
If the node is a ZigBee End Device and was previously on a network, does it attempt to rejoin the network?
7.1
M
true
INP4
On successful rejoining, does the node broadcast a device_annce ZDO command?
7.1
M
true
INP5
If the node is a ZigBee Router and supports touchlink but was not previously on a network, does it switch to a touchlink primary channel?
7.1
M
false
COM1
Does the implementation provide a mechanism to invoke network steering?
8
M
true
COM2
Does the implementation provide a mechanism to invoke finding and binding?
8
M
true
NSO1
Is the network steering for a node on a network procedure supported?
8.2
O
false
NSO2
Does the node first broadcast the Mgmt_Permit_Joining_req ZDO command?
8.2
M
false
NSO3
If the node is a ZigBee Coordinator or a ZigBee Router, does the node activate its permit joining flag for ≥ bdbcMinCommissioningTime?
8.2
M
false
NSN1
Is the network steering for a node not on a network procedure supported?
8.3
X
M
M
true
NSN2
Does the node attempt to discover networks over a set of channels?
8.3
M
true
NSN3
If suitable networks were found, does the node attempt to join one of them using MAC association?
8.3
M
true
NSN4
If the join was not successful and there are more suitable networks to join, does the node attempt to join another network?
8.3
M
true
NSN5
If the join was successful, does the node wait apsSecurityTimeOutPeriod milliseconds to receive the network key?
8.3
M
true
NSN6
If the network key is not received within apsSecurityTimeOutPeriod milliseconds, the network key is received but could not be decrypted or the authentication fails does the node reset its network parameters?
8.3
M
true
NSN7
Does the node broadcast a Device_annce ZDO command?
8.3
M
true
NSN9
If the TC link key exchange is not successful, does the node reset its network parameters and remove itself from the network?
8.3
M
true
NSN10
If the TC link key exchange is successful, does the node broadcast the Mgmt_Permit_Joining_req ZDO command?
8.3
M
true
NSN11
Does the node activate its permit joining flag if new nodes can join this node?
8.3
M
false
NFP1
Is the network formation procedure supported?
8.4
M
O
false
NFP2
Does the node attempt to form a network over a set of channels?
8.4
M
false
NFP3
If formation is successful and the node is a ZigBee Coordinator, does it initiate its Trust Center functionality?
8.4
M
false
FBT1
Is the finding & binding for a target endpoint procedure supported?
8.5
M
true
FBT2
Does the target identify itself for at least bdbMinCommissioningTime seconds?
8.5
M
true
FBT3
Does the target respond to Identify cluster Identify Query commands?
8.5
M
true
FBI1
Is the finding & binding for an initiator endpoint procedure supported?
8.6
M
false
FBI2
Is the Identify cluster Identify Query command broadcast supported?
8.6
M
false
FBI3
Is the simple descriptor of each respondent obtained with the Simple_Desc_req ZDO command?
8.6
M
false
FBI4
Does the initiator create a binding table entry for each matching cluster to the respondent?
8.6
M
false
FBI5
If a group binding is requested, does the initiator add the respondent to an appropriate group?
8.6
M
false
TLI1
Is the touchlink for an initiator procedure supported?
8.6
M
false
TLI2
Does the initiator broadcast 5 scan request inter-PAN command frames on the first primary touchlink channel and then once for each remaining primary channel?
8.6
M
false
TLI3
Does the initiator broadcast a scan request inter-PAN command frames on each secondary touchlink channel when using touchlink for formation or joining?
8.6
O
false
TLI4
If the initiator is not on a network, does it ignore any scan request command frames from other factory new initiators?
8.6
M
false
TLI5
If the initiator is not on a network, does it switch into a target mode if any scan request command frames are received from other non-factory new initiators?
8.6
O
false
TLI6
If a target is found, does the initiator transmit a device information request inter-PAN command frame to the selected target?
8.6
O
false
TLI6.1
If a device information request inter-PAN command frame is sent to the selected target but no response is received, does the initiator terminate the touchlink procedure for an initiator?
8.6
O
false
TLI7
If a target is found, does the initiator transmit one or more identify request inter-PAN command frame to the selected target?
8.6
O
false
TLI8
If a scan request command frame is received from a target on the same network as the initiator with the network update identifier field lower than nwkUpdateId, does the initiator transmit a network update request inter-PAN command frame to the selected target and then terminate the touchlink procedure?
8.6
M
false
TLI9
If a target is found on a different network to the initiator and the initiator is on a centralized network, does it terminate the touchlink procedure?
8.6
M
false
TLI10
If the initiator is not on a network and the target is a ZigBee Router, does the initiator transmit a network start request inter-PAN command frame to the selected target?
8.6
M
false
TLI11
If the initiator is on a network and the target is a ZigBee Router, does the initiator transmit a network join router request inter-PAN command frame to the selected target?
8.6
M
false
TLI12
If the initiator is on a network and the target is a ZigBee End Device, does the node transmit a network join end device request inter-PAN command frame to the selected target?
8.6
M
false
TLI13
If the initiator is an end device and a network start request inter-PAN command frame was sent to the selected target, does the node rejoin the network?
8.6
M
false
TLT1
Is the touchlink for a target procedure supported?
8.7
M
false
TLT2
Does the target discard any touchlink commissioning command other than a scan request command and terminate the procedure?
8.7
M
false
TLT3
Does the target discard scan request command frames with an RSSI lower than a product specific threshold and terminate the procedure?
8.7
M
false
TLT4
Does the target respond to a scan request command frame with a scan response command frame?
8.7
M
false
TLT5
Does the target respond to a device information request command frame with a device information response command frame?
8.7
M
false
TLT6
Does the target identify itself on receipt of a identify request command frame?
8.7
M
false
TLT7
Does the target allow starting a new network or joining another network when not factory new (i.e. stealing)?
8.7
O
false
TLT7.2
If the target receives a network start request command frame, is a ZigBee Router and decides not to start a network, does it respond with a network start response command frame with the Status field set to 0x01 (failure)?
8.7
M
false
TLT7.3
If the target receives a network start request command frame, is a ZigBee Router and decides to start a network, does it perform a network discovery?
8.7
M
false
TLT8.1
If the target receives a network join router request command frame, is a ZigBee Router and decides not to be joined to another network, does it respond with a network join router response command frame with the Status field set to 0x01 (failure)?
8.7
M
false
TLT8.2
If the target receives a network join router request command frame, is a ZigBee Router and decides to join the network of the initiator, does it respond with a network join router response command frame with the Status field set to 0x00 (success)?
8.7
M
false
TLT9.1
If the target receives a network join end device request command frame, is a ZigBee End Device and decides not to be joined to another network, does it respond with a network join end device response command frame with the Status field set to 0x01 (failure)?
8.7
M
false
TLT9.2
If the target receives a network join end device request command frame, is a ZigBee End Device and decides to join the network of the initiator, does it respond with a network join end device response command frame with the Status field set to 0x00 (success)?
8.7
M
false
TLT10
If the target is already part of a network when it receives a network start request, network join router request or a network join end device request command and permits stealing, does it leave its current network?
8.7
M
false
TLT11
If the target router is already part of a network when it receives a network start request command and the target router permits stealing, does the target router start a new network?
8.7
M
false
TLT12
After starting a new network, does the target router direct join the initiator to its new network?
8.7
M
false
RBC1
Does the target support reception of the reset to factory defaults command frame?
9.1
O
true
RBC2
Does the initiator transmit a reset to factory defaults command frame to a target?
9.1
O
false
RBC3
On receipt of a reset to factory defaults command frame, does the target reset all attributes of all clusters to their default values?
9.1
M
true
RBC4
On receipt of a reset to factory defaults command frame, does the target not reset its network parameters?
9.1
M
true
RTL2
Does the initiator transmit a reset to factory new command frame to a target?
9.2
M
false
RTL3
On receipt of a reset to factory new command frame and if the target is on a distributed security network, does it leave the network?
9.2
M
false
RTL4
On receipt of a reset to factory new command frame and if the target is on a centralized security network, does it ignore the command?
9.2
O
false
RTL5
Does the initiator use an extended channel scan during a reset via the touchlink commissioning cluster?
9.2
M
false
RNL1
Does a node transmit a leave NWK command frame to another node to trigger the other node to leave?
9.4
O
false
RNL2a
On receipt of a leave NWK command frame with the request bit set to 1 when the nwkLeaveRequestAllowed NIB attribute is set to TRUE, does the node leave the network?
9.4
M
false
RNL2b
On receipt of a leave NWK command frame with the request bit set to 1, does the end device node leave the network?
9.4
M
true
RLZ1
Does a node transmit an Mgmt_Leave_req ZDO command frame to another node?
9.5
O
false
RLZ2a
On receipt of an Mgmt_Leave_req ZDO command frame when the nwkLeaveRequestAllowed NIB attribute is set to TRUE, does the node leave the network?
9.5
M
true
RLZ2b
On receipt of an Mgmt_Leave_req ZDO command frame, does the end device node leave the network?
9.5
M
true
RLA1
Does the node provide a local reset mechanism?
9.6
O
true
RLA2
On activation of the local reset mechanism, does the node reset itself?
9.6
M
true
RLK0
Does the node exchange its link key during network steering on a centralized security network?
10.2.5
M
M
true
RLK1a
Does the node execute the appropriate steps defined by the alternative link key exchange mechanism?
10.2.5, step 1
M
false
RLK1b
If the alternative mechanism is successful, does the node terminate the node link key exchange procedure?
10.2.5, step 1
M
false
RLK3
If the APS Request Key method is used or the alternative mechanism is not successful, does the node transmit the Node_Desc_req ZDO command to the Trust Center?
10.2.5, step 3
M
M
true
RLK4a
If a Node_Desc_rsp ZDO command is not received within bdbcTCLinkKey-ExchangeTimeout seconds does the node retry up to the maximum attempts permitted?
10.2.5, step 4
M
true
RLK4b
If a Node_Desc_rsp ZDO command is not received after the maximum number of attempts permitted, does it terminate the node link key exchange procedure?
10.2.5, step 4
M
true
RLK5
If a Node_Desc_rsp ZDO command is received and the server mask of the node descriptor indicates a core stack of r20 or earlier, does the node terminate the node link key exchange procedure?
10.2.5, step 5
M
true
RLK7
If a Node_Desc_rsp ZDO command is received and the server mask of the node descriptor indicates a core stack of r21 or later, does the node request a new link key using the Request Key APS command frame to the Trust Center, encrypted with its initial link key?
10.2.5, step 7
M
true
RLK8a
If a Transport Key APS command is not received within bdbcTCLinkKey-ExchangeTimeout seconds does the node retry up to the maximum attempts permitted?
10.2.5, step 8
M
true
RLK8b
If a Transport Key APS command is not received after the maximum number of attempts permitted, does it terminate the node link key exchange procedure?
10.2.5, step 8
M
true
RLK9
If a Transport Key APS command frame is received from the Trust Center, containing a new link key, does the node update its Trust Center link key with the new key?
10.2.5, step 9
M
true
RLK11
Does the node verify the new key using the Verify Key APS command frame to the Trust Center?
10.2.5, step 11
M
true
RLK12a
If a Confirm Key APS command is not received within bdbcTCLinkKey-ExchangeTimeout seconds does the node retry up to the maximum attempts permitted?
10.2.5, step 12
M
true
RLK12b
If a Confirm Key APS command is not received after the maximum number of attempts permitted, does it terminate the node link key exchange procedure?
10.2.5, step 12
M
true
AIC0
Does the Trust Center allow the input of an install code?
10.3.1
O
false
AIC2
On receipt of an installation code, does the Trust Center create an entry in its node/link key mapping table (apsDeviceKeyPairSet) with the installation code derived key?
10.3.1, step 2
M
false
ANN1
On receipt of an Update Device APS command frame, does the Trust Center follow the procedure for adding a new node into the network?
10.3.2
M
false
ANN2
If an install code is required and the new node is not in apsDeviceKeyPairSet, does the Trust Center terminate the Trust Center link key exchange procedure?
10.3.2
M
false
ANN3
If an install code is not required and the new node is not in apsDeviceKey-PairSet, does the Trust Center create an entry in its apsDeviceKeyPairSet for the joining node?
10.3.2
M
false
ANN4
Does the Trust Center send the network key to the joining node using a Transport Key APS command frame, encrypted with the entry in apsDeviceKeyPairSet corresponding to the joining node?
10.3.2
M
false
ANN5
If a Request Key APS command frame is not received and the Trust Center requires the new node to exchange its link key, does it request the new node leaves the network?
10.3.2
M
false
ANN6
On receipt of a Request Key APS command frame from the joining node, encrypted with its initial link key, does the Trust Center generate a new link key and transport it to the joining node using a Transport Key APS command frame?
10.3.2
M
false
ANN7
If a Verify Key APS command frame is not received by the Trust Center from the joining node, does it request the new node leaves the network?
10.3.2
M
false
ANN8
Does the Trust Center receive a Verify Key APS command frame from the joining node, update the entry in apsDeviceKeyPairSet corresponding to the joining node with the new key and respond with a Confirm Key APS command frame?
10.3.2
M
false
BKN1
Does the Trust Center allow a known node to join but in a fresh state?
10.3.3
M
false
BKN2
Does the Trust Center store the original install code derived link key for devices that have joined?
10.3.3
O
false
BKN3
Does the Trust Center overwrite the link key for a joining node with the original install code derived link key?
10.3.3
M
false
BKN4
Does the Trust Center overwrite the link key for a joining node with the default global Trust Center link key?
10.3.3
M
false
TCP1.1
Does the Trust Center allow any nodes to join (Trust Center policy useWhiteList)?
[ZIGBEE] Table 4.33
O.7
false
TCP1.2
Does the Trust Center allow only known nodes to join (Trust Center policy useWhiteList)?
[ZIGBEE] Table 4.33
O.7
false
TCP2.1
Does the Trust Center allow a node on the network that transmits a ZDO Mgmt_Permit_Join with a significance set to 1 to affect the Trust Center policy (Trust Center policy allowRemoteTc-PolicyChange)?
[ZIGBEE] Table 4.33
O.8
false
TCP2.2
Does the Trust Center forbid a node on the network that transmits a ZDO Mgmt_Permit_Join with a significance set to 1 to affect the Trust Center policy (Trust Center policy allowRemoteTc-PolicyChange)?
[ZIGBEE] Table 4.33
O.8
false
One or both of the items marked O.7 SHALL be supported.
One or both of the items marked O.8 SHALL be supported.